The crosshatch pattern of AKDO's Origami Sukoshi Cream Taupe gives spaces a dynamic appeal, which is similar to the result of layering textiles.

Product name: Origami Sukoshi Cream Taupe (P)
Part number: MB1716-SUKO00
Availability: Available Upon Request
Dimensions: 10.63×10.63=.785 sqft (+ or -)
Thickness: 3/8"
Grount joint recommendation: 1/16"
Color: Beige
Finish: Polished
Due to the inherent characteristics of natural stone, there may be variations in color, movement and texture from lot to lot. Cream Taupe may be used in wet areas (walls only) when sealed correctly. Two coats of penetrating sealer are recommended.

Interior: Yes
Floor: Yes
Wall: Yes
Exterior – Freeze/thaw: No
Wet Area: Recommended for wet area walls only, if sealed properly
Steam Shower: Yes
Pool: No
Traffic: Standard Commercial
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

DCOF: Due to the natural characteristics and variation in natural stone, slip resistance will vary. Such factors are dependent on lots, finish and the topical sealant applied. There is currently no standard industry test with the ability to measure the exact slip resistance.

In order to reduce the slipperiness of stone surfaces, AKDO suggests selecting a Non-Polished finish such as Honed, Sandblasted, or Textured stone, or choosing a mosaic, as the grout joints in the stone result in an increase of friction.

Newsletter
SELECT A COUNTRY
Remember selection