COMPLEMENTARY MATERIALS

MARK 12” X 24” LAPPATO GYPSUM (H)

SHARE

Mark floor tiles are made from porcelain and are available in six neutral colors. Whites, silvers and rich gray tiles come in matte, textured and honed finishes. Honed tiles appear sleek and shiny, while the Matte tiles are more organic looking. All tiles are rectified allowing for a 1/16” grout joint, creating a seamless installation with minimal grout joints.

Product name: Mark 12” x 24” Lappato Gypsum (H)
Part number: PO1865-1224H1
Availability: In Stock
Dimensions: 11.81'' x 23.62'' = 1.94 sqft
Thickness: 3/8"
Grout joint recommendation: 1/16"
Color: White
Finish: Honed
Material: Porcelain
Available in Northern CA, CT, DE, ME, MA, NH, NJ, NY, PA, RI, VT

Due to the inherent characteristics of porcelain, there may be variations in color, movement and texture from lot to lot.

Interior: Yes
Floor: Residential Floor Use Only
Wall: Yes
Exterior – Freeze/thaw: Yes
Wet Area: Wall Only
Steam Shower: Wall Only
Pool: Yes
Traffic: Residential
Backsplash: Yes
Fireplace Surround: Yes
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

COF: >0.40
Regularity of Length & Width: ISO 10545-2 ± 0.2% ± 0.8 mm
Regularity of Thickness: ISO 10545-2 ± 5.0% ± 0.5 mm
Regularity of Straightness of Sides: ISO 10545-2 ± 0.2 % ± 0.8 mm
Regularity of Rectangularity: ISO 10545-2 ± 0.2 % ± 0.8 mm
Surface Flatness: ISO 10545-2 ± 0.3% ± 1.5 mm
Water Absortion: <0.1%
Breaking Strength: S> 2000 N
Modulus of Rupture: ISO 10545-4 R ≥ 40 N/mm2
Impact Resistance: ISO 10545-5 ≥0.55
MOHs Hardness: 5
Coefficient of Thermal Linear Expansion: ISO 10545-8 ≤7 1/mk
Thermal Shock Resistance: Resistant
Frost Resistance: Resistant
Reaction to Fire: A1 – A1fl
Chemical Resistance: Resistant
Resistance to Household Chemicals: ISO 10545-13 UA
Resistance to Swimming Pool Salts: ISO 10545-13 UA
Resistance to Low Contentrations of Acids and Alkalis: LA
Resistance to High Contentrations of Acids and Alkalis: HA
Resistance to Staining: 5
DCOF: >0.42

Newsletter