The dynamic use of directionally opposing squares in the Axis pattern create a mesmerizing, modern look. A mix of stone combinations, ranging from subtle to bold, further enhance their geometry.

Product name: Perspective Axis Thassos (P) w/Carrara (H)
Part number: MB1232-AXISP0
Availability: In Stock
Dimensions: 11.16'' x 13.5'' = 1.05 sqft
Thickness: 3/8"
Grount joint recommendation: 1/16"
Color: White
Color variation: Medium
Finish: Polished
Due to the inherent characteristics of natural stone, there may be variations in color, movement and texture from lot to lot.

It is important to properly seal marble used in a shower/steam shower, and maintain the sealant regularly to ensure water beads off the tile.

Interior: Yes
Floor: Yes
Wall: Yes
Exterior – Freeze/thaw: No
Wet Area: Yes, when sealed properly.
Steam Shower: Yes
Pool: No
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

Regularity of Length & Width: ISO 10545-2 ± 0,3%
± 1,0 mm

Regularity of Thickness: ISO 10545-2 ± 5,0%
± 0,5 mm

Regularity of Straightness of Sides: ISO 10545-2 ± 0,3%
± 0,8 mm

Regularity of Rectangularity: ISO 10545-2 ± 0,3%
± 1,5 mm

Surface Flatness: ISO 10545-2 ± 0,4%
± 1,8 mm

DCOF: Due to the natural characteristics and variation in natural stone, slip resistance will vary. Such factors are dependent on lots, finish and the topical sealant applied. There is currently no standard industry test with the ability to measure the exact slip resistance.

In order to reduce the slipperiness of stone surfaces, AKDO suggests selecting a Non-Polished finish such as Honed, Sandblasted, or Textured stone, or choosing a mosaic, as the grout joints in the stone result in an increase of friction.

Newsletter
SELECT A COUNTRY
Remember selection