Use Stella to create scintillating feature walls in a variety of commercial and residential applications.

Product name: Ethereal Stella Carrara Bella (H) w/ Stainless Steel
Part number: MB1604-STLAH0
Availability: Available Upon Request
Dimensions: 10.25'' x 8.75'' = .63 sqft
Thickness: 3/8" with 0.4cm Stainless Steel Inlay
Grout joint recommendation: 1/16"
Color: White, Gray, Metallic Silver
Finish: Honed
Material: Stone,Marble,Metal
Epoxy grout should be used when installing Ethereal mosaics. For more information, please download the Ethereal Collection’s Installation Guidelines.

Interior: Yes
Floor: Yes
Wall: Yes
Exterior: No
Wet Area: YES – when properly sealed
Steam Shower: No
Pool: No
Traffic: Standard Commercial
Backsplash: YES – Heat not to exceed 293° F
Fireplace Surround: YES – Heat not to exceed 293° F
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

DCOF – ANSI A.137.1 Due to the natural characteristics and variation in natural stone, slip resistance will vary. Such factors are dependent on lots, finish and the topical sealant applied. There is currently no standard industry test with the ability to measure the exact slip resistance.

In order to reduce the slipperiness of stone surfaces, AKDO suggests selecting a Non-Polished finish such as Honed, Sandblasted, or Textured stone, or choosing a mosaic, as the grout joints in the stone result in an increase of friction.