Interior: Wall and Floor
Exterior: Wall Only Including Freeze/Thaw
Pool: Yes
Traffic: Residential
Backsplash: Yes
Fireplace Surround: Yes
Countertop: No
Shower: Wall Only; Including Steam
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

Abrasion Resistance – ISO 10545-6 Compliant
Breaking Strength – ISO 10545-4 Compliant
Coefficient of Thermal Linear Expansion – ISO 10545-8 ² 7 10-6¥C-1
DCOF – ANSI A.137.1 > 0.42 Wet
Frost Resistance – ISO 10545-12 Compliant
Coefficient of Restitution – ISO-10545-5 Compliant
Bending Resistance – ISO 10545-4 Compliant
Moisture Expansion – ISO 10545-10 ² 0.01% (0.1mm/m)
Reaction to Fire – EN 13501-1 A1fl
Regularity of Length & Width – ISO 10545-2 Compliant
Regularity of Rectangularity – ISO 10545-2 Compliant
Regularity of Straightness of Sides – ISO 10545-2 Compliant
Resistance to Household Chemicals – ISO 10545-13 A
Resistance to Swimming Pool Salts – ISO 10545-13 A
Booted Ramp Test – DIN 51130 R10
Surface Flatness – ISO 10545-2 Compliant
Water Absorption – ISO 10545-3 0.2%

MR – Building product disclosure and optimization – environmental product declarations: EDP + PEF
MR – Building product disclosure and optimization – sourcing of raw materials: 20% pre-consumer recycled content
MR – Building product disclosure and optimization material ingredients: HDP + OHSAS
18001
IEQ – Low-emitting materials: Zero V.O.C. Emissions
MR – Materials & Resources – Recycled Content: 13,7%
MR – Material & Resources – Regional Materials: 32%
MR – Materials & Resources – Sustainability Report: Available self-declared Corporate Sustainability Report (CSR) conform to Global Reporting Initiative (GRI) Sustainability Report
MR – Materials & Resources – Environmental Product Declaration: Available industry-wide Environmental Product Declaration (EPD) conform to ISO14025
MR – Material & Resources – Material Ingredients: Available Health Product Declaration (HPD) in compliance with the Health Product Declaration Open Standard
EQ – Indoor Environmental Quality – Low Emitting Materials: No VOCs Emission
SS – Sustainable Sites – Heat Island Effect: Light Color SRI > 29
EA – Energy & Atmosphere – Energy Performance (Conductivity): 1,0 – 1,3 W/mK
ID – Innovatione & Design Process: Certificate Greenguard