fbpx

2″ X 2″ COASTAL GRAY (TUMBLED)

FIND A SHOWROOM
SHARE

PRODUCT INFO

Coastal Gray is a 2"x2" tumbled mosaic marble tile that brings a soft, muted gray tone and a sense of tranquility to any space. Its tumbled finish enhances the natural beauty, adding subtle texture for a cozy, lived-in feel—perfect for transforming floors and walls into a serene work of art.

Product name: 2″ x 2″ Coastal Gray (Tumbled)
Part number: MB2568-M002T0
Availability: Regular Stock
Dimensions: 12'' x 12'' = 1 sqft
Thickness: 3/8"
Grout joint recommendation: 1/8"
Color: Gray
Color variation: V3 Moderate
Finish: Tumbled
Material: Stone, Marble
Origin: Turkey
Due to the inherent characteristics of natural stone, there may be variations in color, movement and texture from lot to lot.

For wet applications, such as showers and steam showers, Coastal Gray marble must be installed with an epoxy adhesive and grout. Please contact your AKDO sales representative for specific recommendations.

APPLICATION AREA

Interior: Wall and Floor
Exterior: Non Freeze/Thaw, Wall and Floor
Pool: No
Traffic: Standard Commercial
Backsplash: Yes
Fireplace Surround: Yes
Countertop: Yes
Shower: Wall and Floor, Including Steam
The performance of surface covering products often depends on installation, environmental, and usage factors unique to each project. AKDO is not responsible for any effects that may be caused to products due to installation, wear from use, or exposure to environmental factors including but not limited to: hard water, chemicals, heat, flame, smoke, dirt or other substances. It is your responsibility to assess the project to determine if the product you are selecting is appropriate considering the unique characteristics of your installation, and to apply appropriate, high quality sealers when necessary. Please consult your installer for more information.

TECHNICAL INFO

DCOF – ANSI A.137.1 Due to the natural characteristics and variation in natural stone, slip resistance will vary. Such factors are dependent on lots, finish and the topical sealant applied. There is currently no standard industry test with the ability to measure the exact slip resistance.

In order to reduce the slipperiness of stone surfaces, AKDO suggests selecting a Non-Polished finish such as Honed, Sandblasted, or Textured stone, or choosing a mosaic, as the grout joints in the stone result in an increase of friction.

Newsletter